Hydroelastic vibration of the bottom plate of the cylindrical tank coupled with sloshing

Journal of Mechanical Science and Technology - This study is concerned with the hydroelastic vibration of the flexible bottom plate of a cylindrical tank coupled with sloshing. The cylindrical tank...     

Field induced metastable ferroelectric phase in Pb0.97La0.03(Zr0.90Ti0.10)0.9925O3 ceramics

Pb_0.97La_0.03(Zr_0.9Ti_0.1)_0.9925O₃ (PLZT 3/90/10) ceramics prepared by solid-state reaction with the compositions near the antiferroelectric/ferroelectric (FE/AFE) phase boundary were studied. From the polarization–electric field P(E) dependence and ex situ X-ray study, an irreversible electric field induced AFE-to-FE phase transition is verified at room temperature. Dielectric and in situ temperature dependent X-ray analysis evidence that the phase transition sequence in PLZT 3/90/10-based ceramics can be readily altered by poling. A first order antiferroelectric-paraelectric (AFE-to-PE) transition occurred at?～190 °C in virgin sample and at?～180 °C in poled sample. In addition, a FE-to-AFE transition occurs in the poled ceramic at much lower temperatures (～120 °C) with respect to the Curie range (～190 °C). The temperature-induced FE-to-AFE transition is diffuse and takes place in a broad temperature range of 72–135 °C. The recovery of AFE is accompanied by an enhancement in the piezoelectric properties.     

Combined use of an electrostatic precipitator and a high‐efficiency particulate air filter in building ventilation systems: Effects on cardiorespiratory health indicators in healthy adults

High‐efficiency particulate air (HEPA) filtration in combination with an electrostatic precipitator (ESP) can be a cost‐effective approach to reducing indoor particulate exposure, but ESPs produce ozone. The health effect of combined ESP‐HEPA filtration has not been examined. We conducted an intervention study in 89 volunteers. At baseline, the air‐handling units of offices and residences for all subjects were comprised of coarse, ESP, and HEPA filtration. During the 5‐week long intervention, the subjects were split into 2 groups, 1 with just the ESP removed and the other with both the ESP and HEPA removed. Each subject was measured for cardiopulmonary risk indicators once at baseline, twice during the intervention, and once 2 weeks after baseline conditions were restored. Measured indoor and outdoor PM_2.5 and ozone concentrations, coupled with time‐activity data, were used to calculate exposures. Removal of HEPA filters increased 24‐hour mean PM_2.5 exposure by 38 (95% CI: 31, 45) μg/m³. Removal of ESPs decreased 24‐hour mean ozone exposure by 2.2 (2.0, 2.5) ppb. No biomarkers were significantly associated with HEPA filter removal. In contrast, ESP removal was associated with a ?16.1% (?21.5%, ?10.4%) change in plasma‐soluble P‐selectin and a ?3.0% (?5.1%, ?0.8%) change in systolic blood pressure, suggesting reduced cardiovascular risks.     

Experimental and Numerical Analysis of Injection Molding of Ti-6Al-4V Powders for High-Performance Titanium Parts

Both experimental and numerical analysis of powder injection molding (PIM) of Ti-6Al-4V alloy were performed to prepare a defect-free high-performance Ti-6Al-4V part with low carbon/oxygen contents. The prepared feedstock was characterized with specific experiments to identify its viscosity, pressure–volume–temperature and thermal properties to simulate its injection molding process. A finite-element-based numerical scheme was employed to simulate the thermomechanical process during the injection molding. In addition, the injection molding, debinding, sintering and hot isostatic pressing processes were performed in sequence to prepare the PIMed parts. With optimized processing conditions, the PIMed Ti-6Al-4V part exhibits excellent physical and mechanical properties, showing a final density of 99.8%, tensile strength of 973 MPa and elongation of 16%.     

Empirical Analysis of Agricultural Cultural Resources Value Evaluation under DEA Model

Agricultural culture is a productive activity about education and management. It aims at high efficiency and high quality, uses technology as its means, and takes nature as its carrier. Agricultural cultural resources are the product of the rapid development of modern economy. It promotes the development of the national economy and profoundly affects people's production and life. DEA model, also known as data envelope analysis method, is an algorithm that uses multiple data decision units for input and output training to obtain the final model. This article explains the concept and basic characteristics of agricultural culture. Through questionnaire surveys and expert interviews, we collected development data, screened human, material, and financial data, and calculated information on economic and social resources. On this basis, this paper establishes the evaluation index of agricultural culture based on DEA model. Then, through empirical analysis from a specific perspective, it can be concluded that increasing human, material and financial input can achieve economic and social benefits. Generally speaking, cultural investment can promote the development of the industry. The research results of this paper laid a theoretical foundation for the development of agricultural culture, and put forward a development model focusing on technology development, improving investment efficiency, and investing in material resources.     

The efficient lignocellulose-based sorbent for oil spill treatment from polyurethane and agricultural residue of Vietnam

In this study, new and efficient sorbent with density 0.2 g/cm³ was fabricated by incorporating rice straw into polyurethane matrix to get an open cell structure material with high oil uptake capacity. The influences of various important factors such as amount of adding rice straw, size of rice straw particles, and adsorption time on oil adsorption capacity of new sorbent material were investigated. The results showed that the oil absorption rate occurred fast in first 15–30 min, then slowed down and reached saturation level after about 2 h of treatment. Oil adsorption capacity of the new sorbent material was relatively high, up to 12.0 g/g. In comparison with pristine polyurethane or lignocellulosic materials, the new sorbents had higher oil adsorption capacity. Some characteristics of the as-obtained sorbent, such as surface shapes and porosity, were also studied by SEM analysis.     

Back-analysis of geotechnical parameters on PVD-improved ground in the Mekong Delta

This study presents a back-analysis of geotechnical parameters on prefabricated vertical drain improved ground at a site in the Mekong Delta. Various time?settlement behaviors that reflected different clay thicknesses and loading patterns were observed. The total surface settlement behavior at several monitoring locations was simulated using an updated exponential method that considered staged construction. The analyzed results were validated by substituting the values into a theoretical solution for radial consolidation. The estimated theoretical behaviors were comparable with the monitored behaviors. The geotechnical parameters were back-analyzed by applying the previously analyzed results to various theoretical and empirical formulas. However, the use of extensometer data that were installed at large intervals produced different values of the geotechnical properties. Furthermore, finite element analysis supported the back-analyzed total settlement behaviors and nearly disregarded the application of the geotechnical properties that were obtained using either surface or subsurface settlement data. However, settlements and excess pore pressures in the sublayers were not successfully predicted even when the geotechnical properties were adjusted. Thus, subsurface instruments that can be installed closely in thick clay deposits are required to reliably reevaluate the variations in geotechnical properties along a certain depth.     

Multiply Charged Conjugated Polyelectrolytes as a Multifunctional Interlayer for Efficient and Scalable Perovskite Solar Cells

A series of anionic conjugated polyelectrolytes (CPEs) is synthesized based on poly(fluorene-co-phenylene) by varying the side-chain ionic density from two to six per repeat units (MPS2-TMA, MPS4-TMA, and MPS6-TMA). The effect of MPS2, 4, 6-TMA as interlayers on top of a hole-extraction layer of poly(bis(4-phenyl)-2,4,6-trimethylphenylamine (PTAA) is investigated in inverted perovskite solar cells (PeSCs). Owing to the improved wettability of perovskites on hydrophobic PTAA with the CPEs, the PeSCs with CPE interlayers demonstrate a significantly enhanced device performance, with negligible device-to-device dependence relative to the reference PeSC without CPEs. By increasing the ionic density in the MPS-TMA interlayers, the wetting, interfacial defect passivation, and crystal growth of the perovskites are significantly improved without increasing the series resistance of the PeSCs. In particular, the open-circuit voltage increases from 1.06 V for the PeSC with MPS2-TMA to 1.11 V for the PeSC with MPS6-TMA. The trap densities of the PeSCs with MPS2,4,6-TMA are further analyzed using frequency-dependent capacitance measurements. Finally, a large-area (1 cm²) PeSC is successfully fabricated with MPS6-TMA, showing a power conversion efficiency of 18.38% with negligible hysteresis and a stable power output under light soaking for 60 s.